Palm Rest FLEX

Palm Rest FLEX
Well tried and tested, redesigned, and upgraded. We have redesigned and technically upgraded our ahg palm rest FLEX. Four joints allow for any possible adjustment. Each joint is fixed with a clamp, and therefore no set adjustment on the other connections is lost. With the help of the scales, any position can be marked and re-adjusted easily. Joint No. 1 serves the height adjustment and offers a 360-degree turn of the palm rest around the basis plate. Links no. 2.1 and 2.2 allow a continuous adjustment of the height of the palm rest. Please remember that the angle always has to be more than 45 degrees. Over joint no. 3, the palm rest can be turned 360 degrees so that the profiled rubber-layered rest or the round-edged plastic-layered side can be used. This plastic-layered block can be removed easily by loosening the two screws it is fixed with. You may replace this plastic block with an individual-designed layer of your choice and fasten it with the threads already available on the rest. The premium milled palm rest made from high-grade steel and anodized aluminum will fit all UIT rails and be mounted in no time at all. All adjustments can be fixed with the supplied hex key.
weight: 430 g