All alu parts are lighter and milled in futuristic design - Extremely light by use of fiberglass-composite-tubes, - Extremely sturdy through sophisticated foot geometry and extending lever locking system - Quick setup and dismounting by folding legs and lever locking system - Space-saving storage in supplied bag, approx. 63 cm long - Tripod can be placed very close to the stand due to thought-out foot geometry The foot geometry with a rest on the side of the middle tube offers a minimum of body turn when resting the gung. The ammo rest is designed to hold small bore rounds boxes on one side and – turned over – the round tins of air rifle pellets or the famous shaker box. The ammo rest is also equipped with various holes in order to keep tools, e.g. hex key etc. The tripod can be expanded up to a height of 190 cm and adjusted infinitely, by pushing the tubes together it is quickly ready for use in kneeling position. total weight 1,49 kg
All alu parts are lighter and milled in futuristic design - Extremely light by use of fiberglass-composite-tubes, - Extremely sturdy through sophisticated foot geometry and extending lever locking system - Quick setup and dismounting by folding legs and lever locking system - Space-saving storage in supplied bag, approx. 63 cm long - Tripod can be placed very close to the stand due to thought-out foot geometry The foot geometry with a rest on the side of the middle tube offers a minimum of body turn when resting the gung. The ammo rest is designed to hold small bore rounds boxes on one side and – turned over – the round tins of air rifle pellets or the famous shaker box. The ammo rest is also equipped with various holes in order to keep tools, e.g. hex key etc.
The model 8001 Compressed Air CLUB (incl. sight set 6834):
The models 9003 Premium and 8002 are very successful on the air rifle market. Many national and international top results could be reached with ANSCHÜTZ air rifles.
The model 8001 CLUB Walnut replaces the current models 8001 and 8002 Club. The 8002 barrel housing with trigger and complete cocking piston unit was incorporated into the new model 8001 CLUB. This model is interesting for beginners who are looking for a high-quality but low cost air rifle version.
The 8001 CLUB Walnut is equipped with a non-stained walnut stock with vertically adjustable cheek piece. The cheek piece is adjusted via unthreaded steel columns. The butt plate has the same adjustment. The rifle is delivered with rubber butt plate 4709A. The cocking lever is positioned at the right side but can also be attached to the left.
In order to allow an individual adaptation to the trigger the black trigger blade of trigger 5065 B is variably adjustable. The rifle is delivered with a long aluminum compressed air cylinder in silver (shooting capacity approx. 300 shots) and including the sight set 6834. An accessory box is also part of the delivery.
As this beginner model is based on a modular principle it is possible for the advanced shooter to attach most of the other components of the ANSCHÜTZ accessory range apart from the stabilizer.
The model 8001 Compressed Air is derived from the renowned barreled action of the compressed air rifle 8002.
This model is especially interesting for beginners and clubs who are looking for a high quality, attractive but low-cost air rifle version. The cocking lever is at the right side. It is possible, however, to attach it to the left as well.
The light aluminum barrel jacket is as long as the one of the model 8002, the JUNIOR model, however, is equipped with a shorter JUNIOR compressed air cylinder. As this beginner model is based on a modular principle it is possible for the advanced shooter to attach all of the other ANSCHÜTZ accessory components.
The 8001 Compressed Air JUNIOR COLOR is equipped with a colored right/left stock. The cheek piece is variably adjustable in height via steel columns without thread, the backend is equipped with the butt plate carrier with tiltable column guide and the aluminium butt plate 4759.
Removable air reservoir with integral manometer (air pressure gauge)
Air pressure regulator with air filter
Approx. 200 shots per fill
Maintenance-free stabilizer
5-way adj. match trigger
Adjustable forearm
Anodized aluminum frame with textured grey surface
Right-hand medium PRO-grip
Cheekpiece, forearm & grip have a rough, anti-skid finish
Highly adj. buttpad
Dry-fire capability
Overall length varies from 42.13" to 43.31" due to adj. buttpad
7.94 lbs. to 10.14 lbs.
50g to 170g trigger-pull (1.764 oz. to 5.996 oz.)
Incl. hard case, accessory box with fill adapter, air-release screw, sight raiser block, special grease 4425, Allen keys (5), safety discs, o-rings, barrel weight and moveable weights (2 pieces under forearm riser block); manual; and test target
Meets ISSF requirements
Accurate, accurate, accurate. If you want to repeatedly hit the 10-ring, get the Anschutz 8002 S2 air rifle. That's what it'll do all day long. You don't have to shoot in the Olympics or shoot 10-meter competitively to appreciate the magnificent quality and workmanship that goes into every Anschutz air rifle. You'll never outgrow the accuracy potential of this rifle.
The new ANSCHÜTZ 9015 ONE BASIC is a target air rifle based on our successful and unique 9015 ONE model. The outstanding precision and various adjustment possibilities of the fore-end combined with the unrivaled target two-stage trigger 5065 4K are complimented with the newly developed rear section of the 9015 ONE BASIC stock. The solid and robust stock is equipped with the well-known and common ANSCHÜTZ butt plate and cheek piece adjustments which have been proven over many years.
The modular construction of the ONE-stock The stock, including grip, can be separated from the fore-end in just a few seconds by simply releasing one screw. It can then be reassembled precisely without any play to form a 100 % rigid connection. This offers you the opportunity to change the ONE Basic rear section for the rear section of the 9015 ONE, allowing for even more adjustment possibilities and stock positions.
Shooting boots newly designed by shooters for shooters.
The entire tongue is a combination of 3-D mesh and a permanently absorbent, reticulating, perforated sponge, well padded tongues absorb pressure which might cause discomfort.
A strongly adhesive Velcro is integrated to fix the tongue at the forefoot and the top
The 2 leather accents on the boot give stability, combined with the cut of the boot`s body lacing up to the top gives every foot a customized fit.
Velcro closure to ensure a snug fit.
The stability of the shank in combination with the solid rubber cap gives firm support to the foot.
The blue stitching gives the boots a sporty fashion touch.
The anatomically supportive inner sole prevents foot fatigue during competition.
Available in sizes: 35 to 51 (3 to 14 1/2).
Material: leather Sole: India rubber
Made after the latest ISSF rule starting from 1.1.2013
A new glove developed by ahg-Anschütz which offers more contact to the gunsupporting hand, much freedom of movement and maximum padding. Thumb and forefinger are open to allow comfortable loading of the gun.
We have used a special soft leather and a breathable fleece material for a good regulation of temperature and reduction of perspiration.
Palm and back of the glove are equipped with a newly developed hard-wearing antislide padding for proper adjustment to the hand and non-slip positioning of the gun. If required, the glove can be washed at 30° C. (Handwash)