Cotton Pads

Benchrest Slide ahg-MAX 300 
The ahg-MAX 300 benchrest slide combines in stages tilted benchrest adjustments up to max 20° . The toothed profile of the rail and carrier with 4 screws on either side guarantee a parallel and solid guidance.The 3-piece front connecting joint locks both rails in parallel or tilted position. A stabilizing bar (40 g) with 2 weight rings (30 g ea.) corrects the overall balance point of the rifle. The benchrest slide ahg-MAX 300 is mounted onto the forend stock by sliding 2 slot nuts into the stock rail. The integrated supporting legs can be used as bi-pods.
- inclination/tilting max approx.  20°
- resting width 60 mm
- suitable for guns with T-nut
- adjustable in length
- simple mounting
- total weight approx. 450 g

MEC "HANDSTOP" 

• Can be moved to the side, i.e. the hand can individally be positioned at the stock.
• Variable height; according to the referring anatomy of the hand the height can be adjusted with the help of spacers.
• The special shape minimizes pain.
• Two possibilities to fix the sling. It is thus possible to have the sling pull from the center (sling is fixed in the screw) or the sling pull does not come from the center as the hand stop has been moved to the side.
• Scales for the movement to the sides.

MEC „TUBE" 
Sighting line extension for air rifles:
- Extends the sighting line to the maximum.
- Variably adjustable sighting line.
- Variations of weight and balance.
- Reduction of recoil. 

Monoframe Deluxe 
The Monoframe Deluxe includes a side blinder made of lexan to cover the not aiming eye. The blinder can be adjusted in angel with a stainless steal setscrew.

For 25 mm Spectacle Lens. Your individual, improved spectacle lens is put in the ahg-monoframe. With the help of a set adapter and a clamp, the ahg-monoframe is mounted centrically in front of the sight disc or the iris disc. Therefore, your sight defect is corrected directly on the iris disc, conse-quently aiming mistakes are avoided to a large extend.

Only spectacle lenses with an outer diameter of 24 mm can be used.

ahg-monoframe does not correspond to the presently valid rules of ISSF but can be used in many other disciplines.

Optical Cap Winner 10.10 ( for 25 mm lens) 
This new optical cap Winner 10.10 unites the requirements of modern sighting technique with the demands to precision optics for sports shooters.( Not allowed for ISSF competition)

Advantages of optical cap WINNER 10.10

1. The view takes place in the optical centre of the lens, providing 
an ideal optical image
2. The lens is fixed at an exact angle of 90° to the sighting line 
(the holder is cut from one piece and can be adjusted in length)
3. Astigmatism correction: balance of the head pitch by simply turning 
the glass holder (scaling)
4. No changes in the accustomed view through the rear sight by the 
closed, compact system
5. During transport the Winner 10.10 may remain on the gun thanks 
to a sturdy mounting base
6. Shooters with optical correction are virtually equal to shooters with 
glasses
7. Possible correction of any form of ametropia: higher correction of 
glasses and astigmatism
8. Addition of filter or second glass possible with additional filter cap
9. Easy exchange of optical glasses for various shooting disciplines
10. Distance to the eye individually adjustable (nominal distance: 12-14 mm)

-palm rest Pillar 
ahg-palm rest Pillar unites many advantages. A staged plastic support offers many different positions of the palm, a well-thought-out adjustment unit optimizes the position. The basic height of 36 mm can be raised in 2 mm steps up to 54 mm. If this height is not sufficient, two 5 mm raisers - also supplied - can be used additionally. More 5 mm raisers are available as additional accessory - only 5 mm longer screws are subsequently required.

ahg-palm rest Pillar can also be rotated infinitely sideways and adjusted repeatedly by means of a scale. This plastic palm rest can be mounted at the basis in various positions, same applies for the sliding block which is pushed into the UIT rail. This offers numerous positions of the palm rest. 


Length: 160 mm
Basic height: 36 mm
Weight: 250 g

PRONE TRIPOD 

Prone position tripod.

- Steady tripod.
- Anti-glide leg tips.
- Easy fold-away.
- Lightweight (275 g).
- Swivel joint inclusive.

Side shift for sight set (master eye) 
Better vision with the other eye.

Many (senior) people have different vision in each eye, nevertheless, our brain equalizes 
this difference.

If, in the worst case, a shooter is right handed but has better vision with the left eye, the newly developed ahg-side mount equalizes this disadvantage. This side mount sight set allows aiming with the left eye for right hand shooters or the right eye for left hand shooters 
while the rear sight remains on the original prism of the rifle. 

For transport in the rifle case, the complete diopter can be detached or only the side mount part. The side mount and the 2-part adapter screw have a toothed profile and an adjustment pin. The position of the side mount can be fixed repeatedly with a clamping screw. The rear sight may remain mounted on the rifle.

Sling CONTACT 

• Firm synthetic fabric. 
• Simple adjustment of arm sling and arm length by means of buckles. 
• This sling can even be adjusted to very short arm lengths due to many holes along the sling, therefore no pressure from the buckle to the glove when in position.

Optimum connection of the sling to the shooter‘s jacket is ensured by a slewable metal clip on the ahg sling into which the hook (Art. 336) of the ahg-shooting jacket engages. In this manner slipping of the sling is prevented.

• Pliable, no-stretch material guarantees constant sling length.
• Optimum connection to the shooter´s jacket.
• Freely mobile metal catch is hooked to the shooting jacket.
• No slipping of the sling.

SOFT GUN CASE 
ahg - Soft Case with back-pack straps

- slot for name tag
- especially sturdy zipper
- zippers can be locked (lock not supplied)
- rubber hose at the bottom offers safe transport of the cleaning rod
- small and large attached bag with zipper for accessories
- 8 cm foam material

Outer dimension: 135 x 30 x 10 cm